Can You Use Key Oil On A Trumpet?

Oiling trumpet valves should not be done with oiling oil such as WD-40, mineral oil, olive oil, or other oils found in your home. It may seem tempting to use these, since they are typically easy to locate, but you should wait until you can find the right valve oil before using them. Brass instruments can be severely damaged by these home-remedies.

What Can I Use Instead Of Trumpet Valve Oil?

When you remove stuck valves, baby oil can be used as a lubricant. In this way, you can prevent the valves from sticking again. The best way to use baby oil is to start with a small amount and add more as needed. Mineral oil is the main component of baby oil, which is very similar to valve oil in terms of its composition.

Are Valve Oil And Key Oil The Same?

In addition to lubricating the moving parts of the valve, valve oil also protects the bare metal of the inner valve from corrosion. As well, woodwind musicians use valve oil (called key oil for woodwinds since they do not have valves, they have keys) to lubricate the mechanism of the keys so that they can spring back more smoothly.

What Oil Can Be Used For Trumpet Valves?

When using brand new trumpets, petroleum-based oil is best. The oil used in worn-in trumpets is lighter and won’t be as effective as petroleum oil. If you use this oil on an older instrument, you may have to reapply it more often. The cost of synthetic oils is typically higher, but they are better at reducing friction in tight valves than regular oils.

What Can You Use To Lubricate A Trumpet?

Using tuning slide oil, Lubricate the slides that have triggers attached to them (the first and third slides). You should slide the oil back and forth two or three times to work it. Grease the slides that do not have triggers attached (the main slide and the second slide) with a small amount of slide grease.

Can I Use Wd-40 On Trumpet Valves?

A general purpose cleaner, the WD40 is suitable for most cleaning tasks. In fact, it is a lubricant that can be used in a wide range of applications. Other than that, it’s not so good. You might want to use it as a slide lube on a trumpet if you were planning on using it. As it only absorbs so much water, it may cause the valves to gummy.

What Can I Use Instead Of Valve Oil?

It’s not a good idea to replace valve oil with anything else. The valve oil is a water-based lubricant, so it won’t harm your instrument, but using oil or silicone-based lubricants, such as WD-40 or T-9, can eat away at the nickel in your instrument and cause serious damage to it.

What Can I Use In Place Of Valve Oil On A Trumpet?

Baby oil can be used on trumpets, but be careful not to overdo it. When you remove stuck valves, baby oil can be used as a lubricant. In this way, you can prevent the valves from sticking again. The best way to use baby oil is to start with a small amount and add more as needed.

Watch can you use key oil on a trumpet Video